To draw a donut by specifying inside and outside diameters



 

  1. Specify the inside diameter of the donut.
  2. Specify the outside diameter of the donut.

Specify the first point of the inside diameter of the donut, or enter the diameter. If you specify a point, you are prompted to specify a second point. To draw a filled circle, enter 0 (zero) for the inside diameter.

Outside diameter of donut <value>: Specify the first point of the outside diameter of the donut, or enter the diameter. If you specify a point, you are prompted to specify a second point.

Center of donut: Enter the center point to place the donut. The prompt repeats, and you can continue to draw donuts until you choose Done or press Enter.

3D Array
© Copyright 2022. BackToCAD Technologies LLC. All rights reserved. Kazmierczak® is a registered trademark of Kazmierczak Software GmbH. Print2CAD, CADdirect, CAD.direct, CAD Direct, CAD.bot, CAD Bot, are Trademarks of BackToCAD Technologies LLC. DWG is the name of Autodesk’s proprietary file format and technology used in AutoCAD® software and related products. Autodesk, the Autodesk logo, AutoCAD, DWG are registered trademarks or trademarks of Autodesk, Inc. All other brand names, product names, or trademarks belong to their respective holders. This website is independent of Autodesk, Inc., and is not authorized by, endorsed by, sponsored by, affiliated with, or otherwise approved by Autodesk, Inc. The material and software have been placed on this Internet site under the authority of the copyright owner for the sole purpose of viewing of the materials by users of this site. Users, press or journalists are not authorized to reproduce any of the materials in any form or by any means, electronic or mechanical, including data storage and retrieval systems, recording, printing or photocopying.