Chamfer Edges: CHAMFEREDGE

()

Toolbar: Solids Editing > Chamfer Edges

Ribbon: Draw 3D > Chamfer Edges (in Solids Editing)

Menu: Modify > Solids Editing > Chamfer Edges

Keyboard: _CHAMFEREDGE

Experience Level: Intermediate

Creates a chamfer, or a beveled edge, at the intersection of 3D solid faces.

To chamfer one or more edges of a 3D solid

Select an edge or [Loop/Distance]: Select an edge of a solid to chamfer.

Select another edge on the same face or [Loop/Distance]: Select additional edges to chamfer, or press Enter.

Press Enter to accept the chamfer or [Distance]: Choose Distance to change the current settings for chamfer distances, or press Enter.

To chamfer all edges that belong to a single face

Select an edge or [Loop/Distance]: Choose Loop.

Select edge of loop or [Edge/Distance]: Select an edge. One of two possible faces adjacent to the selected edge will be highlighted.

Enter an option [Accept/Next]: Choose Accept to chamfer edges of the highlighted face, or choose Next to chamfer edges of the other face that is adjacent to the selected edge, and press Enter.

Press Enter to accept the chamfer or [Distance]: Choose Distance to change the current settings for chamfer distances, or press Enter.

To set the chamfer distances

Select an edge or [Loop/Distance]: Choose Distance.

Enter chamfer distance for the base surface <1.0000>: Enter chamfer distance for the base surface (measured from the selected edge to the chamfer edge on the first face), then press Enter.

Enter chamfer distance for the adjacent surface <1.0000>: Enter chamfer distance for the adjacent surface (measured from the selected edge to the chamfer edge on the second face), then press Enter.

Tell me about...

Fillet Edges

Chamfer

How do I...

Chamfer entities